Electronics

OEM CR2032 3V Lithium Battery used in most CatEye cycle computers.

Cadence Magnet for all CatEye computers that record cadence.

Wheel magnet for all CatEye cycle computers

Crank Arm Cadence Magnet for Specailized SpeedZone Computers.

A stem mount for SpeedZone Elite, Comp, and Pro computers.

The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.

High-efficiency charger cable for Flux headlights. - High capacity wire can transfer more power with less loss. - Custom "L" shaped Mini USB Male for the best fit to Flux headlights. - NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.

Sigma Sport's Cadence Power Magnet is the correct replacement magnet for any Sigma Sport computer featuring cadence (computers sold separately). It attaches to your crankarm with zip ties and double-sided tape (both included).

Handlebar and Stem Bracket Band and Bracket for your Strada Wireless, Strada Double Wireless, Urban Wireless, Micro Wireless, Commuter, and Adventure. The FlexTight Kit Wireless system is the full kit for your CatEye wireless computer mounting needs.

Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

Replacement Garmin insert for our computer mounts. - Replaceable Garmin mount - Check mount for compatibility

Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

Need to hold down your GoKASE or DriKASE iPhone case? If you have multiple bikes, an ATV, or stroller, the Xtended X Bracket will allow multiple mountings with GoKASE or DriKASE iPhone cases. • Fits handlebar diameters 22mm to 34mm

• To position the Shimano Di2 battery inside the fork steerer • Including stainless steel tool to remove the set.

The Accessory mount was developed as a flexible solution for mounting tubes to your frame. The various mounting solutions allow for bottle cage mounting, frame mounting and it will also work with our Direct mount saddle system. Simply select your mounting and adapt the mount (using the suggested cut points where relevant) to fit. - Glass Fiber reinforced Nylon mounting bracket - textile strap - Frame bracket offering the possibility to mount accessory like an inner tube, tool, jacket, etc from your bike frame thanks to Velcro strap attachment - The bracket can be screwed on frame rivets or shortened then mounted with zip-ties on frame tubes - Also compatible with Syncros Direct Mount Saddles through their threaded inserts - Weight: 23g approx.

Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers

Protect your Garmin Edge 1000 with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.

Protect your Garmin Edge 820 (sold separately) with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.

CatEye's Out Front Bracket frees up your handlebars and positions your favorite CatEye computer just in front of your stem for optimal viewing and accessibility.

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

Mounting your phone in your car is almost a necessity these days. At BiKASE, we promote hands-free driving. Playing on your phone is never a good idea, whether it’s texting, social media, reading emails or talking, our goal is for every driver on the road to be safe and alert! We have found that people, while driving, often fumble with their phone while using GPS apps and need a convenient way to view where they are going. The BiKASE Uni Mount eliminates setting your phone in the seat next to you, or putting it in a cup holder, or worse yet, having the phone in your hand. In all these situations, you take your eyes off the road! In addition, we have tried other products that attempt to solve this problem. Other vent mounts attach to 1 louver in the vent and often fall off when hitting a bump in the road. Our patent pending bracket uses heated spring steel that won’t break and securely holds the bracket into place. Then, we use very powerful N48 magnets that hold your phone to the adhesive brushed stainless steel disc. The disc is either attached to your phone, to your case, or placed between your phone and case. It’s simple and it works!

- Control Center computer mount for any 31.8mm handlebar - Dual clamps provide superior holding power, excellent for GPS units

Capture all your aqua action with GoPro's Surfboard Mounts. When maximum holding strength is required, the Surfboard Mounts shine thanks to industrial adhesive and tethers. And, you can get extra creative thanks to the included FCS compatible male plug.

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

Profile Design's UCM Aerobridge positions your computer between your aero extensions to give you an additional accessory mount. It features adjustable width so you can be sure of a great fit.

- Easily mounts to any flat surface - options are endless - office, car, home, shop - Large enough to hold the iPhone 6/6s/7 Plus but still discreet at less than 1" - 15 lb. Pull, to securely hold heavier devices - Magnetically safe, will not affect your GPS, Bluetooth, Wi-Fi, credit cards, Apple Pay, data transfer or the camera on your device

- SUPER GRIP: Specially designed vent clip made from Super Grip TPE won’t slip like other cheap silicone vent mounts. - MOUNT IN SECONDS: Slide mount over almost any vent. Use any Rokform magnetic case or use the supplied inserts to mount almost any phone or case. - ANTI-SLIP MAGNETIC FACE: Specially designed TPE anti-slip grip allows solid non-slip mounting in portrait and landscape. No more sliding and constant adjustment. - MACHINED ALUMINUM: Specially designed bezel holds front grip securely in place and won’t peel off like other lesser quality glued together mounts. - MAGNETIC TECHNOLOGY: Specially designed Neodymium magnet will not negatively impact your GPS, credit cards, Wi-Fi, Apple Pay, Bluetooth, camera or data transfer.

Easily Mount Any Device The Rokform Universal Adapter is the perfect mounting solution for any phone, camera, or tablet. It can easily be attached to any case or device with its 3M sticky side. Once you've attached the Universal Adapter, you can keep your device where you need it most, and mount to any metal surface or our specialty accessories. #1 Device-Mounting System - The Universal Adapter includes Rokform's signature integrated mounting system (RMS). The RMS gives you the power to mount your device to an assortment of accessories that include bicycles, motorcycles, car dashes, strollers, and golf carts. Roksafe Magnetic Mounting - Since 2011, Rokform has been the pioneers of Safe Magnetic Mounting for iPhone. The Universal Adapter features a Roksafe magnet, which you can use to mount your device to any metal surface or one of our magnet mounts. It is guaranteed safe, and will not affect your GPS, Bluetooth, Wifi, Credit Cards, Apple pay, Data Transfer, or Camera. - Mount almost any phone using Rokform technology, with or without a case - 3M VHB easily adheres to almost any surface - Keep your phone thin - Rare Earth Magnet allows for easy mounting

The Ultimate Hands-Free Experience Avoid spending your hard-earned money on a Hands-Free ticket! Use the Rokform BAM Magnetic Car Dash Mount to access your GPS or music, screen or answer calls safely. Arriving at your destination is half the fun when you cruise with the Rokform BAM Magnetic Car Dash Mount. Use your smartphone as your guide—simply snap your device on, input your endpoint to your favorite navigation app and you are good to go. With the Rokform BAM Magnetic Car Dash Mount, you will always arrive safely and on time. Roksafe Magnet Technology Since 2011, Rokform has been the pioneers of Safe Magnetic Mounting. The Rokform BAM Magnetic Mount is guaranteed safe, and will not affect your GPS, Bluetooth, Wifi, Credit Cards, Apple pay, Data Transfer, or the Camera on your device. Ultra-Strong Magnet The discreet, 1" Rokform BAM Magnetic Mount is made from a 15-pound-pull rare earth magnet which creates an extremely strong, secure pull. You can be assured that when you use this magnet mount with your favorite mountable Rokform case, your device will remain firmly in place. Works On Any Flat Surface The Rokform BAM Magnetic Mount is great for use just about anywhere! From the office to the car or around the garage or house, simply peel to reveal the 3M tape, stick to a clean, flat, hard surface, and let the magnets get to work. - Easily mounts to any flat Surface - options are endless - office, car, home, shop - Large enough to hold the iPhone 6/6s/7/8 Plus, iPhone XS Max or iPhone 11 Pro Max but still discreet at less than 1" - 15 lb. Pull, to securely hold heavier devices - Magnetically safe, will not affect your GPS, Bluetooth, Wi-Fi, credit cards, Apple Pay, data transfer or the camera on your device